DIY rear projection film: what to know before you apply it

Rear projection film can turn a window, glass partition or acrylic panel into a screen, and you can apply it yourself. A good result comes down to choosing the right film, preparing the glass and taking your time with the application.

Order samplesRequest a quote
DualView Definition rear projection film on glass showing a projected image

1. Pick the right film first

FilmLookGood for
AccentFrosted whiteGeneral purpose, lower ambient light
DefinitionDark gray, higher contrastRooms and windows with more ambient light
Definition ProBlackThe most light rejection of the range
IntrigueTranslucentFloating, see-through images
DualViewViewable from both sidesShort-throw and off-axis setups
ClearTransparentKeeping glass see-through

Not sure? Test before you buy: sample packs let you try films on your own glass with your own projector.

2. Measure and order the right size

Measure the area you want to project on, not just the pane. Films are cut to custom sizes, so send the exact width and height you need. Note the glass type (single pane, double pane, tempered) and whether you are applying to glass or acrylic.

3. Prepare the surface

  • Clean the glass thoroughly and remove any old film, adhesive, paint specks or labels.
  • Work in a clean, low-dust space; dust trapped under film shows when the projector is on.
  • Have a squeegee, a spray bottle, a lint-free cloth and a sharp blade ready. DIY application kits are available.

4. Apply carefully

  1. Do a dry fit to check size and orientation before removing the liner.
  2. Follow the application method for your film, working from the center outward to push out water or air.
  3. Trim edges once the film is in place, then let it set before running content.

Large panes, high windows and storefronts are easier with two people, and a professional window-film installer is a good option for big or hard-to-reach glass.

5. Set up the projector

Place the projector behind the glass, line up the image with the film, and adjust focus and keystone. Rear projection hides the projector from viewers, so plan its mounting, power and ventilation out of sight. For window displays, see retail window projection film.

Common DIY mistakes

Wrong film for the light

Bright storefronts usually need a darker, higher-contrast film than a dim lobby.

Rushing the prep

Dust and old adhesive show through once the image is on.

Skipping a test

A sample on your own glass shows how the film looks with your projector.

Questions

Can I apply rear projection film myself?

Yes. DIY application kits are available, and professional window-film installers are an option for large or hard-to-reach glass.

Does it work on acrylic?

Yes. See projection film for acrylic.

Which film should I start with?

It depends on the light where the screen will be. Order samples or ask us for guidance on film selection, projectors and installation.

Need help choosing?

Rear Projection Films is a division of Screen Solutions International. Film is cut to your size and shipped from our California office, and we offer technical guidance on film selection, projectors and installation.

Request a quoteOrder samples

Scroll to Top